Gamry Instruments EIS Box, Руководство оператора, Страница: 12 / 52

Safety Considerations
12
Environmental Limits
Note that there are environmental limit conditions on the storage, shipping and operation of this equipment.
The EIS Box has
not been designed for outdoor use.
Storage Ambient temperature – 40  C to 75  C
Relative humidity Maximum 90% non-condensing
Shipping Same as storage plus
Acceleration Maximum 30 G
Operation Ambient temperature 0

C to 45

C
Relative humidity Maximum 90% non-condensing
Cleaning
Clean the external chassis only when necessary.
Disconnect the EIS Box from all power sources prior to cleaning.
Use a cloth lightly dampened with either clean water or water containing a mild detergent, to clean the outside
of the EIS Box enclosure. Alternatively, you may use isopropyl alcohol. Do not use a wet rag or allow fluid to
enter the EIS Box enclosure. Do not immerse the EIS Box in any type of cleaning fluid (including water). Do not
use any abrasive cleaners.
Service
Except for switching between Ethernet and USB communications, your EIS Box instrument has no user-
serviceable parts inside. Refer all service to a qualified service technician.
Warning:
Never operate the EIS Box with any cover or panel on the chassis open.
Dangerous voltages may be present at several points within the EIS Box chassis, including PC board traces.
Always remove the power connection before opening the EIS Box case.
Warning:
The EIS Box is not designed for operation in conditions where liquid water may
enter the chassis, or water vapor may condense within the chassis. Operation of an EIS Box that has water
within the chassis can create a safety hazard, which could result in personal injury or death.