G
AMATRONIC
E
LECTRONIC
I
NDUSTRIES
L
TD
.
P+ PREMIUM 60, Installation Guide,
rel.
1.4
45
Figure 42: Turning on a module
6
.
To verify that the new module is operating normally, navigate to the module status screen
("Main screen > Status > Modules"), press on the icon of the module that was just switched on, and
verify that the status is "ON" for these four items: PFC, Inverter, Input relay, Output relay. Verify that
the other fields are also normal.
Figure 43: Verifying status of added module
7.
On the same screen ("Status > Modules"), press the Output button, select the replacement module
and verify that the output frequency matches the system nominal value, and that the output voltage
of each phase is within 2 % of the system nominal value.