Gamatronic Electronic Industries Ltd.
72
CENTRIC User Guide, Release 0.3
10.
T
HE BUILT
-
IN WEB INTERFACE
(
OPTION
)
The
Centric
can be monitored and controlled from a distance over an intranet or the
Internet,through the same menus and screens used on the
Centric
control panel.
This feature is compatible with Windows, WIndows NT, and Linux networks.
Note: Use of the built-in web interface on Windows requires the
Microsoft Internet Explorer
browser version 7
or higher.
An SNMP agent and the associated MIB is available upon request.
10.1
Preliminaries to use of the Web interface
To enable the
Centric
Web interface:
1
Consult with your Network Administrator to obtain an IP address for your
Centric
, and the
appropriate mask and gateway address.
2
Configure the
Centric
with the IP address. See the
Centric
Installation Guide for instructions to
configure the IP address.
3
Connect the
Centric
to the local Ethernet network using the Ethernet (RJ45) port on the rear panel
of the
Centric
controller. This is the port labeled “SNMP” on the controller rear panel.
4
On a computer terminal that has connectivity to the
Centric
IP address, open a Web browser and
enter the
Centric
IP address in the URL bar. For example: “//192.102.2.130” (without quotation
marks), and press Enter. You should see the
Centric
's main menu. From that point you can
continue as usual as if you were using the Mega's display screen. If your computer screen doesn't
have touch capability, use your mouse to make selections.
