Galvanic Applied Sciences ViscoSite VL800, Руководство по эксплуатации

Страница: 123 / 133

ViscoSite VL800 Viscometer
Operating Manual
ViscoSite VL800 Viscometer Galvanic Applied Sciences, Inc.
Email: service@galvanic.com
Phone: (978) 848--2701
Operating Manual Rev: 2.0E Toll-Free: 1 (866) 252-8470 Page 122 of 132
11.4 Editing Modbus Values
When editing the value column, the value entered must be within the limits given
in the Allowed Values column of Table 11.1. If it is not, the cell border will turn
red to indicate that the entered quantity is invalid. Hovering the mouse cursor
over the triangle in the upper right corner of the red-bordered cell will indicate
the valid range of values that can be entered into the cell, as shown in Figure 11.3.
Editing Modbus Register values shall be performed ONLY at the request of and
under supervision of a Galvanic Applied Systems Service Technician.
Figure 11.3: Invalid Register Value Message
11.5 Modbus Register Map
The Modbus register mapping is shown in Table 11-2 below.
Register Index
Data Type
DeviceInfo_SerialNumber 400100 Integer
DeviceInfo_CalibrationDate 400102 Date
DeviceInfo_ValidationDate 400104 Date
DeviceInfo_ViscosityUnderMeasurement 400106 Double
DeviceInfo_ResonantPhase 400108 Double
DeviceInfo_ResonantFrequency 400110 Double
DeviceInfo_TemperatureUnderMeasurement 400112 Double
DeviceInfo_DomeTemperatureUnderMeasurement 400114 Double
Units_Density 400164 DensityUnits
Units_Distance 400166 DistanceUnits
Units_Temperature 400168 TemperatureUnits
Units_Viscosity 400170 ViscosityUnits
Options_ManualDensity_Enabled 400180 Boolean
Options_ManualDensity_Density 400182 mg/cm
3
Options_TimeAverageViscosity_Enabled 400212 Boolean
Options_TimeAverageViscosity_AverageSpan 400214 Milliseconds
Options_CableLength_Enabled 400244 Boolean
Options_CableLength_Length 400246 Double
Options_TemperatureCompensation_HighTemperature 400276 Double
Options_TemperatureCompensation_HighViscosity 400278
Position 3 fixed-
decimal