ViscoSite VL800 Viscometer
Operating Manual
ViscoSite VL800 Viscometer
Galvanic Applied Sciences, Inc.
Email: [email protected]
Phone: (978) 848--2701
Operating Manual Rev: 2.0E
Toll-Free: 1 (866) 252-8470
Page 12 of 132
Important Safety Guidelines for the ViscoSite VL800 Viscometer
Please read the following warnings and cautions carefully before using the ViscoSite VL800
Viscometer.
This equipment must be used as specified by the manufacturer or
overall safety will be impaired.
Access to this equipment should be limited to authorized, trained
personnel ONLY.
Observe all warning labels on the transmitter and transducer
enclosures.
The isolated analog outputs and alarm relay contacts of the ViscoSite
system may be powered by a source separate from the one(s) used to
power the ViscoSite transmitter. Disconnecting the main power source
to the ViscoSite transmitter may not remove power from the isolated
analog output signal terminals.
During installation, commissioning, normal operation, maintenance,
and servicing, this system contains items which may be hazardous to
humans if handled or operated incorrectly or negligently.
Any safety recommendations or comments contained herein are suggested guidelines only.
Galvanic Applied Sciences Inc. bears no responsibility and assumes no liability for the use,
implementation, and/or failure to implement these suggested recommendations.
The ViscoSite VL800 Viscometer transmitter can be configured to be safely operated in
Class 1, Div 2, Groups B, C. D areas and General-Purpose areas.
