ViscoSite VL800 Viscometer
Operating Manual
ViscoSite VL800 Viscometer
Galvanic Applied Sciences, Inc.
Email: [email protected]
Phone: (978) 848--2701
Operating Manual Rev: 2.0E
Toll-Free: 1 (866) 252-8470
Page 77 of 132
Clearing Passwords for Password Protected
Access Levels
Use of the “Clear Password” software functionality will clear the
password for the Technician access level, allowing editing access to the
system
without password entry
. Operator level permissions are
unaffected.
However
, an Operator will gain access to Technician level
access by opening the “Enter Password” box and clicking “
OK
”
.
Galvanic Applied Sciences strongly recommends retaining password
protection to the Technician access level to prevent accidental
modification or unauthorized changes to critical system parameters.
5.3.4.1 Clearing the Technician Access Level
Password
•
Select “Change Password” from the home screen to
bring up the prompt shown in Figure 5.7.
Figure 5.7: Change Password Prompt
•
Type in the (current) password for the technician access
level.
•
Check the “Clear Password”
box.
•
Leave the Password and Retype Password boxes blank.
•
Click
OK
to complete the process of clearing the
password for the currently logged in elevated level.
Reinstating Passwords for Password Protected
Access Levels
5.3.5.1 Reinstating a Password After the Technician
Level Password has been Cleared
•
Once logged in at the Factory level, press the
“
Change
Password
”
button. The same prompt shown in Figure
5.7 will appear, but the
“
Original Password
”
box will be
greyed out.
