14
Creating a gateway for the wall and aviary kit
Before you begin constructing your fence, slide the steel plate into
the green gate anchor and push locking pin into place as shown in the
illustration.
To construct a gateway, screw an insulator to the frame, the same
side as the gate hinges. Screw a green gate anchor to the opposite gate
post.
Thread one coil of wire along the top line of insulators until you get
to the insulator beside the gate hinge. Measure enough wire to cross the
gateway and cut it off. Tie the end to the loop of the gate handle and
hook the handle to the green gate anchor. To complete, tie a new wire
onto the metal plate of the gate anchor and continue to thread the wire
through the insulators around the aviary. Tie off at end. Repeat for lower
line of insulators.
After you have set up your Gallagher fence line you are ready to
connect your energizer.
1
2
3
