From the “System Utilities Sub-menu”, pushing “ENTER” and then using the “NAV/PM1” encoder for
scrolling will give access to the following pages:
Power-On Procedure -
this gives you the ability to select the option that will apply when the DS-CP25
powers up after being switched on:
By pressing “ENTER” and rotating the “PM2” or “PM3” encoder, it is possible to choose between two
options: “Fade In On” or “Fade In Off”.
The currently running option will be displayed with an Asterisk to the right of the option description.
To change the option, simply ENTER on the option not displaying the Asterisk and that option will become
active and an Asterisk will now appear to the right of the option description.
The following two options are available:
FADE-In = Off
- when the DS-CP25 is turned on, all Outputs regardless of their status before the Unit was
switched off, will be MUTED or UNMUTED automatically, meaning the DS-CP25 will have no active
Outputs, or active Outputs during the start-up process, depending on the Outputs’ previous status.
SYSTEM UTILITY:
Power On Procedure
7
FADE-In = On
- when the DS-CP25 is turned on, all Outputs not previously muted before the Unit was
switched OFF
will be active. Meaning the DS-CP25 outputs will be controlled by a volume ramp to avoid
any sudden sound. If the option “Fade-In = On” is selected, the screen will show the following:
Delay Time/Distance -
this page allows you to select the measurement unit to be used for the Delays:
Time
(in milliseconds “ms”) or
Distance
(in meters “m”)
By pressing ENTER and rotating the “PM2” or “PM3” encoder, it is possible to select the measurement unit
to be used for the delay, which will be confirmed by pushing the “ENTER” button.
The following screen that shows the selected delay measurement is Time (milliseconds):
SYSTEM UTILITY:
Delay Units
Delay Units
Unit: Time (ms)
Power-On Procedure
Fade-In: On
