By pressing the “ENTER” button and rotating the “PM3” encoder, it is possible to scroll through the
previously saved presets and the available empty locations (identified by “Empty Memory”).
If no user presets are stored, the “Delete a Program” screen will show empty memory locations for all 1-20
presets as shown in the example below for location 10:
If Presets are available, they will be shown in the “Delete a Program” page as follows:
By using the “PM3” encoder, it is possible to select a preset to be deleted.
Pressing the “ENTER” button on a selected preset will bring up the “
[Enter] for Delete
” page, showing the
selected preset.
Delete a Program
10: Light Comp 3b
Delete a Program
10: Program
11
For example, if we want to delete the preset 10, “Light Comp 3b”, the screen will be the following:
Confirming the deletion by pressing “ENTER” again, will force the DS-CP25 to erase the selected preset
and the following transitory screen will appear:
Once the preset is deleted, the above screen will disappear, returning to the following screen:
Where “Preset 01” is the currently running Preset.
Note:
At any time it is possible to quit the deleting action by pressing the “ESC” button.
Interface Utilities Sub-menu
- this sub-menu allows you to define the remote control interface [USB or
RS485] to be used for controlling the DS-CP25:
UTILITY MENU:
Interface Utilities
Multi-Band Compressor
Preset 01
Wait: Deleting . . . . .
10: Light Comp 3b
[ENTER] for Delete
10: Light Comp 3b
