To store the Preset Name, press the “ENTER” button again.
The above action will take you to the “
Enter to Save
” page showing the selected location for the preset and
the final edited name:
Pressing “ENTER” again, will store the preset in the selected location with the chosen name and the
following transitory screen will appear on the LCD:
Saving to Memory . . . . .
10: Light Comp 3b
[Enter] to Save
10: Light Comp 3b
Save a Program
10: Light Comp 3b
10
Once the preset is stored, the above screen will disappear, returning to the following screen:
Where “Preset 01” is the one running before storing the new one.
To make the new one the current preset, you need to load it with the “Recall a Program” procedure.
If during the Preset Storing process you want to overwrite an existing memory location, select this location
in the
“Save a Program”
page, then “ENTER” and you will be asked if you want to overwrite this preset
with the following
“[ENTER] to Overwrite”
screen displaying the currently stored preset and location:
If you wish to proceed, press “ENTER” again and the DS-CP25 will go ahead with the
“Edit Name Preset”
page and the subsequent overwrite on completion of the previously described storing process.
Note:
At any time it is possible to quit the storing action by pressing the “ESC” button.
Delete a Program -
this page allows you to delete a preset already stored in the DS-CP25 Memory:
PROGRAM UTILITY:
Delete a Program
[Enter] to Overwrite
10: Light Comp 3b
Multi-Band Compressor
Preset 01