MENU “LCOMP/RCOMP” RMS Compressors Editing [Access by pushing the “Lim/Comp” -
“Edit/Bypass” buttons]
This Menu is related to the editing of the RMS compressors parameters and to the selection of the number
of bands for the DS-CP25 compressor to work with. The DS-CP25 can work as Monoband, 2 or 3 bands
stereo compressor.
If the DS-CP25 has been set as Monoband compressor, no choice is allowed for the X-Over frequencies
used for the band division in Multi band mode, and ONLY the FIRST of the 3 available compressor is
editable.
If the DS-CP25 has been set as 2 bands compressor, the user can set the X-Over frequency used for the 2
bands creation and ONLY the FIRST and SECOND of the 3 available compressors are editable.
If the DS-CP25 has been set as 3 bands compressor, the user can set the X-Over frequencies used for the
3 bands creation and ALL the 3 available compressors are independently editable.
The selection of the Compressor type and the eventual X-Over frequencies can be done from any one of
the compressors’ editable pages and it is linked to the other 2 compressors editing pages.
So, if selected the number of bands in the editing environment of the Compressor 1, the choice will be
replicated on the editing environments of the Compressors 2 and 3. So, if the Monoband Compressor is
selected from the editing environment of the Compressor 3, the environment will be no longer accessible in
the all compressor’s parameters and to edit the Monoband compressor will be necessary to access the
editing environment/pages of the Compressor 1.
6
From the “Default Screen”, it is possible to access the “UTILITY” menu by pushing the “UTILITY” button
and the Sub-Menus pages can be selected by rotating clockwise and counter-clockwise the “NAV/PM1”
encoder.
Upon selecting the sub-menu page, using the “ENTER” button, the sub menus can be accessed again
“scrollable” using the “NAV/PM1” encoder and accessible for parameter editing by again pushing the enter
button.
Through the “ESC” button, it is possible at any time to go back to the action and page preceding the
“ENTER” button use.
Once inside the Sub-Menus pages, the several options can be scrolled through using the “PM2” or “PM3”
encoders and selected/confirmed pushing the “ENTER” button.
Note:
In every Sub-Menu the option currently selected/running will have an
Asterisk “*”
showing to the
right of the description on the LCD screen.
Options that are not selected/running will be not be displayed with Asterisk.
Pushing the ENTER button on an unselected option will mean an asterisk will then appear and this option
will now take over as the currently selected/running option.
System Utilities Sub-menu
- this sub-menu allows to access several operations related to the DS-CP25
Start Up and General Configuration:
• Menu “UTILITY” [access by pushing the “UTILITY” button]
UTILITY MENU:
System Utilities
