14
• Menu “Input LIN/RIN” - Input Channel. Eq. Editing [access by pushing the “EQ Edit/Mute” buttons]
From the “Default Screen”, it is possible to access the “Input LIN/RIN” menu by pushing the “EQ Edit/Mute”
buttons at the bottom of the LIN or RIN LED bars. Once the button is pressed, the related blue “EDIT” LED
will turn ON. The Sub-Menu pages can now be scrolled through by rotating clockwise and
counter-clockwise the “NAV/PM1” encoder.
For parameter editing, it is necessary to press “ENTER” and an arrow will appear on the left of the screen
“->”. Then use the “PM2” and “PM3” encoders for selecting and setting the parameter values. On some
parameters that have three independent values, you will also need to use the “NAV/PM1” encoder, eg filter
parameter settings.
The “EQ Edit/Mute” buttons have also the Channel MUTE function. If pressed for more than 3 seconds, the
related Input will be MUTED and the LED will turn RED.
To UNMUTE the input from the MUTE condition, press the “EQ Edit/Mute” button again for more than 3
seconds.
Note:
All parameter editing can be done using the “NAV/PM1”, “PM2”, and “PM3” encoders. The current
shown value of the selected option is AUTOMATICALLY loaded during the encoders’ use, and stored as the
current value. Once leaving, the page is AUTOMATICALLY loaded during the encoders’ use and stored as
current value upon leaving the page.
Note1
: Once the desired options have been selected using the 3 encoders, they are automatically saved as
current, and stored in the DS-CP25 system status once leaving the page.
Note2
: To exit this page, push the “ESC” button.
Input (LIN/RIN) Channel. EQ Block Scheme
The DS-CP25 in its input path, before the RMS Compressors section, make available to the user a
powerful 5 Band parametric Equalizer with each one of the 5 Filters selectable as Peaking or Shelving.
In addition, Hp and Lp filters up to 24dB/Oct slope, are available.
In the following block scheme, which shows the DS-CP25 overall structure, the EQ is represented by the
purple block.
