From “Interface Utilities”, press “ENTER” to access the Interface Setup.
Interface Setup -
this screen allows you to choose the remote control protocol for the DS-CP25.
By pressing “ENTER” and then using the “PM2” or “PM3” encoder you can choose between the two
possible interfaces (USB or RS485) for the DS-CP25.
Pressing “ENTER” on a selected source will make an Asterisk appear to the right of the description on the
LCD, as in the following example, which shows the selected interface as USB.
Interface Setup
Source: USB
INTERFACE UTILITY:
Interface Setup
12
Security Sub-menu
- this sub-menu allows the User to set the parameters shown, lock the DS-CP25 and
set a Password, therefore limiting the unit’s functions and controls to those who have access to the
appropriate Password.
Press “ENTER” and then use the “NAV/PM1” to scroll between options.
Unit Lock -
this sub-menu allows the user to set a PASSWORD for the device to limit access to the
parameters’ editing.
Press “ENTER” to access the
“Enter Password”
page:
UTILITY MENU:
Security Utilities
SECURITY UTILITY: . . . . .
Unit Lock
Enter Password
[ ]
