Gaggia Milano La Reale Скачать руководство пользователя страница 8

Страница: 8 / 88

This Manual reflects the machine's status at the

time of its provision: the manufacturer reserves

the right to update its contents with no obligation

to update previous editions as well.

1.4 GRAPHICAL CONVENTIONS

The texts and descriptions of particular

importance for the personnel's safety and

for the product's proper use, including any

improper conduct to be avoided and the relative

obligations and prohibitions, are accompanied

by specific symbols.
The graphical representations of the symbols

used in this document and their relative

meanings are provided below.

DANGER

The text refers to situations

of immediate danger for the

operators and any exposed

persons.

Caution

The text refers to situations that

could be potentially dangerous

for the operators and any

exposed persons.

Warning

The text refers to warnings

concerning operations of

particular importance for good

machine operation.

PROHIBITION

Indicates the prohibition to

perform certain actions and

procedures; the failure to

respect a prohibition could

result in damage to the machine

(even irreparable), serious

harm to the environment, and/

or dangerous situations for the

staff and any exposed persons.

Note

Supplementary information

and/or useful suggestions for

the machine's proper use and

functionality.

Interventions that can be

performed by expert operators

(professional baristas) assigned

to the machine's use.

Interventions that must be

performed exclusively by

qualified and authorised

personnel (installer,

maintenance technician, etc.).

Whenever necessary, certain parts of the text

in the Manual are highlighted in bold in order

to draw attention to any particularly important

aspects.

ENG

GENERAL INFORMATION

Содержание La Reale

























































































Результаты поиска

Содержание La Reale

Отзывы:

Похожие инструкции для La Reale

Бренды по названию

Популярные бренды

Gaggia Milano La Reale, Инструкция по установке и эксплуатации

Результаты поиска

Содержание La Reale

Отзывы:

Похожие инструкции для La Reale

Бренды по названию

Популярные бренды