Gaggenau CV482105, Инструкция по эксплуатации

Страница: 7 / 36

Induction cooking
en
7
This appliance is labelled in accord-
ance with European Directive
2012/19/EU concerning used elec-
trical and electronic appliances
(waste electrical and electronic equip-
ment - WEEE).
The guideline determines the frame-
work for the return and recycling of
used appliances as applicable
throughout the EU.
5 Induction cooking
5.1 Advantages of induction cooking
Induction cooking is fundamentally different from tradi-
tional cooking methods, since the heat builds up dir-
ectly in the cookware. This offers numerous advant-
ages:
¡
Saves time when boiling and frying.
¡
Saves energy.
¡
Easier to care for and clean. Spilled food does not
burn on as quickly.
¡
Controlling the heat supply and safety; the hob in-
creases or decreases the heat supply as soon as
the user changes the setting. The induction cooking
zone stops the heat supply if you remove the cook-
ware from the cooking zone without you having to
switch it off first.
5.2 Cookware
Only ferromagnetic cookware is suitable for induction
cooking.
For example:
¡
Enamelled steel cookware
¡
Cast iron cookware
¡
Special induction-compatible cookware made from
stainless steel
You can find more information on which items of cook-
ware are suitable for induction cooking in
→
"Cookware test", Page 25 .
In order to achieve a good cooking result, ensure that
the ferromagnetic area of the cookware base corres-
ponds to the size of the cooking zone. If the cookware
is not detected on a cooking zone, place it on a cook-
ing zone with a smaller diameter.
If you are using the FlexZone as a single cooking zone,
you can use larger cookware that is particularly suited
to this zone. You can find information on positioning
the cookware in
→
"Flex Zone", Page 15 .
The base of many items of induction cookware is not
fully ferromagnetic: For large cookware with a smaller
ferromagnetic base, only the area that is ferromagnetic
heats up. As a result, the heat is not distributed evenly.
The temperature of the non-ferromagnetic area may
therefore be too low for cooking.
Cookware bases that contain aluminium reduce the fer-
romagnetic area. This may reduce the output and the
cookware will not be detected sufficiently or at all, and
will therefore not be heated sufficiently.
Unsuitable cookware
Never use flow plates or cookware made of the follow-
ing:
¡
Thin-walled normal steel
¡
Glass
¡
Clay
¡
Copper
¡
Aluminium