29
Note:
You can set a stabilization time between two
microwave outputs so that the temperature is
distributed evenly within the food. To do this, touch
the
6
symbol and set a time using the rotary selector.
6.
Use
C
to select the third phase.
7.
Select the required microwave output or type of oven
heating using the function selector. Set the cooking
time, temperature or grill setting using the rotary
selector.
8.
Use
C
to select the
6
"Cooking time" function.
9.
Set the required cooking time using the rotary
selector.
10.
Press
™
to confirm.
The main menu for the sequential operation is
displayed. The settings for each phase are shown in
the display.
11.
Start with
I
.
The operation begins. The cooking time starts
counting down.
Once the cooking time has elapsed, the appliance
switches off. An audible signal sounds. The signal stops
early if you touch the
™
symbol, open the appliance door,
or set the function selector to
0
. The sequential operation
has finished.
Changing the settings of the current phase
:
Touch the
H
symbol. The operation stops. Touch the
h
symbol and change the settings. Use the
™
symbol to
exit the menu. Start with
I
.
Deleting the settings:
Touch the
'
symbol.
Pause:
The operation can be paused using the
H
symbol. Use the
I
symbol to continue.
Switching off:
To stop the operation and cancel the settings, turn the
function selector to
0
.
Notes
▯
The sequential operation can be supplemented with
the combination mode.
▯
The 1000-watt microwave output setting can only be
selected once.
▯
The oven heating functions cannot be combined with
the 1000-watt microwave output setting.
▯
The order of each setting is entirely up to you. You can
start with the cooking time, microwave output or type
of oven heating.
▯
If you open the appliance door during cooking, the fan
may continue to run.
End of cooking time
In oven mode, you can delay the cooking time end to a
later time. This function is not available in conjunction
with the microwave mode.
For example: It is 2:00 PM. The dish requires a cooking
time of 40 minutes. You want it to be ready at 3:30 PM.
Enter the cooking time and delay the cooking time end
until 3:30 PM. The electronics system calculates the start
time. The appliance starts automatically at 2:50 PM and
switches off at 3:30 PM.
Bear in mind that food that spoils easily should not be
left in the oven for too long.
Delaying the cooking time end
You have set the type of heating, temperature, and
cooking time.
1.
Use
C
to select the
5
"End of cooking time" function.
&RQYHFWLRQ
)
12:50
