26
Setting the type of heating and
temperature
1.
Use the function selector to set the required type of
heating, e.g. "Convection".
The
H
symbol for "Convection" and the default
temperature 360°F (180°C) appear in the display.
2.
Set the temperature using the rotary selector.
Note:
If required, you can now set the cooking time
for your dish and delay the cooking-time end to a later
time. Touch the
h
symbol; the sequential operation
menu is displayed. Use
C
to select and set the
6
"Cooking time" function. Use
C
to select and set the
5
"Cooking-time end" function.
For more detailed information
~
"Sequential
operation" on page 28
3.
Start with
I
.
The
“
heat-up symbol appears in the display (only if the
oven temperature has been set to 210°F (100°C) or
higher). The bars continuously display the heating status.
When the set temperature has been reached, a signal
sounds and the
“
heat-up symbol goes out.
If the "Quick heat" function is activated, the
’
symbol
for "Quick heat" appears.
Note:
You can activate or deactivate a heat-up signal in
the basic settings. This signal sounds when the required
temperature is reached.
You can change the temperature at any time using the
rotary selector.
You can change the type of heating at any time using the
function selector. Press
I
to restart.
Pause:
The operation can be paused using the
H
symbol. Use the
I
symbol to continue.
Switching off:
To stop the operation and cancel the settings, turn the
function selector to
0
.
Calling up the current temperature:
Touch the
(
symbol to display the current oven
temperature for several seconds (from 210°F (100°C)).
Use the
™
symbol to return to the standard display.
Note:
During continuous operation after heating up,
slight deviations in temperature are normal, depending
on the type of heating.
Quick heat
Your appliance reaches the required temperature
particularly fast with the "Quick heat" function.
So you achieve a uniform cooking result, do not place
your meal in the oven interior until "Quick heat" has
ended.
You must activate the "Quick heat" function in the basic
setting.
~
"Basic Settings" on page 39
Safety shut-off
For your protection, the appliance has a safety shut-off
feature. Every heating operation is switched off after 12
hours if the appliance is not operated during this time. A
message appears in the display.
Exception:
programming with the long-term timer.
Turn the program selection to
0
, after which you can
operate the appliance in the manner to which you are
accustomed.
)
