23
Completing initial set-up
"Initial set-up complete" appears in the display.
Confirm with
™
.
The appliance enters the standby mode and the standby
display appears. The appliance is now ready for
operation.
Heating up the oven
Ensure that no packaging remnants have been left in the
cooking compartment.
To remove the new cooker smell, heat up the oven when it
is empty and closed. An hour with Convection Broil
R
at
390°F (200°C) is ideal for this purpose. For instructions
on how to set this type of heating, refer to the
Oven
section.
Cleaning accessories
Before using accessories for the first time, thoroughly
clean them with hot soapy water and a soft dish cloth.
Activating the appliance
Standby
The appliance is in standby mode if no function is set or
the child lock is activated.
The brightness of the control panel is dimmed in standby
mode.
Notes
▯
There are various indicators for standby mode. Pre-set
is the GAGGENAU logo and the time. If you would like
to change the display, see the section on
Basic
settings
.
▯
The brightness of the display depends on the vertical
viewing angle. You can even out the display using the
"Brightness" setting in the basic settings.
Activate appliance
In order to exit standby mode, you can either
▯
Set the function selector,
▯
Touch a control panel,
▯
or open or close the door.
Now you can set the desired function. Read the
appropriate chapters to learn how to set functions.
Notes
▯
If "Standby screen = off" is selected in the basic
setting, you must turn the function selector to exit the
standby mode.
▯
The standby display appears again if you have not
made any settings for a long while after activation.
▯
The cooking compartment lighting goes out after a
little while if the door is open.
,QLWLDOVHWXS
FRPSOHWH