G-WEIKE LF1390, Инструкция по использованию

Страница: 62 / 75

G.Weike Laser
Profession Laser Manufacturer more than 15 Years.
55
i. Cotton swab: two packs.
j. Multimeter: 1.
Basic maintenance operation according to the following table:
6.2 The peripheral equipment daily maintenance and maintenance
About cold water machine, voltage stabilizer and laser and other peripheral equipment
routine maintenance, please refer to the corresponding operating instructions, the following
will only do general description.
6.2.1 Waterway maintenance
High-power role is largely laser cooling, cold water machine make laser under
constant temperature condition, so good and regular maintenance is the key to guarantee
the normal work of the machine;
Requirement of circulating water of cold water machine must use distilled water at the
same time, but because of quality problems, there still exists certain minerals circulating
water, dust and other impurities, and the dust in the environment may also be in some
operating links into circulating water, these impurities deposition can lead to the water
system and cutting machine parts (such as metal filter, cutting machine in the heat
exchanger head) of congestion, which seriously affect the cutting effect and even burn out
optical element. Environment of dust and debris on the radiator in the cold water machine,
water pump accumulation will lead to the radiator and water pump cooling bad, resulting in
adverse, burn compressor, refrigeration burning phenomenon of water pump, this also will
directly influence the cutting effect; So cold water machine daily maintenance is particularly
important; Various types of cold water machine daily maintenance must be strictly in
accordance with their own cold water machine maintenance instructions (see chart 6-1,chart
6-2).
Caution :Please wear dust mask,dust glasses
and gloves when cleaning the air filter.The
cleaner must be the professional person who
have read the water cooling machine use
manual before or familiar with the water cooling
machine.
The machine must stop before maintenance; maintenance shall
be done 5minutes after the machine is powered off. Otherwise
the risk of electric shock may occur. When the environment
temperature is lower than 0
℃
and the machine stops for long
time, water inside the machine must be drained totally.