G-WEIKE LF1390, Инструкция по использованию

Страница: 61 / 75

G.Weike Laser
Profession Laser Manufacturer more than 15 Years.
54
Chapter6 Maintain and trouble shooting
6.1 Summarize
In order to ensure the normal use of laser cutting machine, it must be for daily
maintenance and maintenance equipment. Because of the whole machine adopts high
precision parts, must be very careful in the process of daily maintenance, in strict
accordance with the operating rules of each part, and shall be maintained, and shall not
be barbaric operation, so as not to damage the components.
6.1.1 General rule
Use the most suitable lubricant for the quality of lubrication is to keep the machine
tool. So that you can avoid the failures and its consequences. In this sense should pay
attention to the following considerations.

Before operating: Machine before put into operation, must be according to the
lubrication lubrication machine seriously. If the machine for a long time have not used
(such as ocean shipping), must check the lubrication condition of the whole machine.

Lubrication points for attention: The lubrication of machine tools according to the
lubrication chart and instructions of lubrication chart. It is recommended that you also
pay attention to the following points:
1. Come on don't open in excess of the prescribed time and drains, and often kept clean.
2.Wash oil and lubrication points shall use only without fiber flock wiping cloth, do not use
wool waste, do not use kerosene and gasoline, and to use the thin liquid spindle oil (" spray
lubricating oil ").
3. Synthetic lubricants are not allowed to be mixed with mineral oil or other manufacturers of
synthetic oil use. Even for other manufacturers of the same characteristics of synthetic oil.
4. Emissions of waste oil only in the warm-up state.
5. Must be special attention to the harmless disposal of waste oil.

Cleaning matters needing attention : Must be within the prescribed time interval, the
comprehensive cleaning the equipment. Clear dirt can scrub, or with industrial
vacuum cleaners gettering.

Safety tips : When maintenance work must be closed by a master switch to machine
tools, to shut it down. Must strictly abide by the safety regulations, in order to avoid an
accident.
The user should be regular maintenance spare parts as follows:
a. Acetone: purity of 99.5%, less than 0.3%, water capacity of 500 ml bottle.
b. Absorbent cotton: 5 packages.
c. Alcohol: 500 ml, more than 99.5% purity.
d. Lens paper: 5.
e. Air ball: 1.
f. Dropper needle: a (medical).
g. Organic glass: 200 * 300 * 20.
h. The ink stone (red) : 1.