43
4.
Safety advice
It is necessary to ensure that only trained specialists (for the definition
thereof see EN 50110-1, DIN VDE 0105 or IEC 60364) are charged with jobs
related to the product (planning, transport, assembly, installation, start-up,
maintenance, repair, dismantling).
Moreover, it is necessary to ensure that the documents required for
installation, start-up, operation, maintenance and repair of the product are
made available to the specialists and observed by them duly.
Observe operating instructions before connection to the mains.
Relieve supply line from strain by an appropriate means.
Do not damage connecting cables.
Use enclosed rubber grommet on cable outlet from profile.
Observe standards and regulations for extra-low voltage (SELV) during
installation and laying of cables.
By no means switch a 'permanent OPEN' contact when using the unit on
smoke and fire protection doors (DIN 18250)! This will nullify the door
assembly's fire approval.
Installation works involving the use of electrical
equipment are dangerous.
Insufficient wire cross sections may cause a fire.
Therefore it is important to always observe the
specified cross sections.
Connections to a 230 V mains are dangerous to life !
The installation of electrical components must
be carried out by trained electricians only. Non-
observance of the installation advice may result in
fire and other hazards.
DANGER
