G-U BKS SecureConnect 200, Инструкция по монтажу и эксплуатации

Страница: 61 / 72

61
8.3 Switching the A-opener’s acoustic signal on and off
„ „ Connect A-opener to SECURE connect 200F according to connection
diagram.
„ „ Disconnect SECURE connect 200R from power supply.
„ „ Bridge terminals V4, 93, 92, 91.
„ „ Wait until SECURE connect 200F stops flashing.
„ „ Connect SECURE connect 200R and 200F (e.g., by closing the door)
„ „ Switch-on voltage on SECURE connect 200R.
An automatic switching sequence will be started and completed after 30 s.
During this period of time, the A-opener will not be active.
„ „ Disconnect SECUREconnect 200R from power supply and remove
bridges.
„ „ Wait until SECUREconnect 200F stops flashing.
„ „ Switch on power.
SECURE connect 200R and 200F must not be
separated during this period (e.g. by opening the
door).
ATTENTION
SECURE connect 200R