48
Power and data transmission unit
Mounting und operating instructions
SECUREconnect 200
12.2013 | 15887EE | Printed in Germany
EN
6.
Wiring advice
6.1 Wiring and electrical connection
The cables must be laid in such a way that they cannot be squeezed in or
dammaged in the area of the lock forend during installation.
Distribution boxes must be accessible for maintenance work. Cable types,
lengths, and cross sections must conform to the specifications.
6.2 SECURE
connect
200 terminals
To facilitate connection, all terminals can be
disconnected from the front.
6.3 Connection terminals of SE-
CURE
connect
200F (leaf part)
6.3.1 Terminals for monitoring contacts (I1 - 14 / V4)
This is where the door monitoring contacts of the electromechanical or
motor-driven locks (if provided) are connected.
With the door closed, the feedback signals are transmitted to
SECURE
connect
200R (frame part) in an encrypted way and put out 1:1
to a potential-free changeover contact via the relays of a connected I/O
module IO10 (optional)-
see connection diagram in
chapter 8.
Observe standards and regulations for extra-low
voltage (SELV) during installation and laying of
cables.
CAUTION
