Fysic FX-3850, Руководство пользователя

Страница: 51 / 64

51
10.3 Installation:
• Connect or disconnect the cables of the phone and the phone supply
adapter only to the base station when the power supply adapter has
been unplugged from the mains socket, and the phone connector has
been disconnected from the phone socket.
• Do not install the phone during a lightning storm.
• Do not install a phone connection point in a wet or moist environment.
• Do not touch uninsulated phone or adapter cables, unless they are dis-
connected from the phone network or the mains power.
10.4 Placement:
• The phone is powered by a power adapter. A 230 Volt mains socket
shall be available at the location where the phone is placed.
• Preferably, do not place the device on surfaces that have been treated
with cellulose; the rubber feet can leave traces on these.
• Do not place the phone in the direct vicinity of other phones or other
electronic (medical) devices, TL tubes and other gas discharge lamps;
The emitted radio waves of these products may interfere with the re-
ceipt of the alarm signal of the remote control.
10.5 Mains power failure:
• In case of failure of the mains voltage, batteries (if inserted) support the
complete functioning of this phone, including alarm function, for more
than 12 hours (depending on the type and quality of the batteries).