FXPANSION DCAM SYNTH SQUAD, Руководство по эксплуатации

Страница: 98 / 110

98
Using DCAM: Synth Squad as VST plugins in Sonar
Launching a plugin
1. With a project open, use the Insert menu to insert Strobe, Cypher, Amber or Fusor as a soft synth:
Insert • Soft Synths • [VST plugins folder name] • plugin
2. Choose the appropriate output configuration – the synths are stereo, while Fusor has additional stereo outputs.
3. If the ‘MIDI Source’ checkbox was not left checked in the dialog box, you need to create a MIDI track and route its output to the
plugin.
If you encounter any problems performing the steps above, please consult your host’s documentation or contact the
manufacturer’s tech support channels – the DCAM: Synth Squad plugins operate in the same way as any other instrument
plugins.
Recording the output as audio
To do this you must Sonar’s mixdown functions.
Using DCAM: Synth Squad as VST plugins in FL Studio
Launching a plugin
1. The DCAM: Synth Squad plugins may not be displayed in the plugin list by default. To make them part of the list select ‘More…’
to popup a list of all available plugins. From the bottom-right of this window click ‘Refresh’ then ‘Fast Scan (recommended)’.
2. Enable the checkboxes next to the Strobe, Cypher, Amber and Fusor plugins which are shown in red (meaning that it is a newly
found plugin).
3. Now you can add the required plugin to the project by selecting ‘Channels • Add one…’ and then selecting the plugin.
4. Assign the plugin to an FX track, using the ‘Channel Settings’ window. This FX track plays its output (main output for Fusor).
Setting up additional output monitoring for Fusor
1. Enable the additional outputs using the down-arrow menu, just underneath the red plugin icon in the top-left corner of the
plugin window.
2. The additional outputs occupy the susequent FX tracks from the FX track you originally specified for Fusor’s main output (1-2).
If you encounter any problems performing the steps above, please consult your host’s documentation or contact the
manufacturer’s tech support channels – the DCAM: Synth Squad plugins operate in the same way as any other instrument
plugins.
Recording the output as audio
To do this you must use FL Studio’s export/mixdown functions.
Using DCAM: Synth Squad as VST plugins in Reaper
Launching a plugin
1. Create a new track and bring up the FX Browser.
2. Add the Strobe, Cypher, Amber or Fusor plugin (located in the VSTi section of the FX Browser).
Setting up additional output monitoring for Fusor
1. Bring up the FX Chain for the track on which you inserted Fusor.
2. Right-click on the Fusor VSTi in the FX Chain and click on the ‘Build multichannel routing for output of selected FX’ function in
the menu that appears.
Recording the output as audio
To do this you must use Reaper’s audio mixdown features.