FXPANSION DCAM SYNTH SQUAD, Руководство по эксплуатации

Страница: 96 / 110

96
Using DCAM: Synth Squad as RTAS plugins in Digidesign Pro Tools 7.x
DCAM: Synth Squad requires Pro Tools 7 or later. For best performance, version 7.1 or later is highly recommended. Pro Tools
6.x, or any earlier versions are not compatible.
Launching a plugin
1. Insert the Strobe, Cypher, Amber or Fusor RTAS plugin onto a stereo Instrument track.
Setting up additional output monitoring for Fusor
1. Create a stereo Aux track.
2. Set the input of the Aux track as the relevant stereo output from Fusor (after Fusor is inserted into the project, its outputs
become available as track input sources).
3. Repeat this process for as many additional Fusor outputs that you need to monitor.
If you encounter any problems performing the steps above, please consult your host’s documentation or contact the
manufacturer’s tech support channels – the DCAM: Synth Squad plugins operate in the same way as any other instrument
plugins.
Recording the output as audio
To do this you must use Pro Tools’ routing and recording functions (see the Pro Tools documentation).
Using DCAM: Synth Squad as AU plugins in Apple Logic 7.2 or later
Launching a plugin
1. Insert the Strobe, Cypher, Amber or Fusor AU plugin onto an audio instrument channel.
2. Create a track in Logic’s Arrange window, corresponding to the audio instrument channel on which you inserted the plugin. You
can now play it from this track.
Setting up additional output monitoring for Fusor
The instrument channel’s output plays the output of all Fusor channels. To assign the other channels, follow this procedure:
1. Create a stereo Aux channel.
2. Set the input of the Aux channel as the relevant stereo output from Fusor (after it is inserted into the project, its outputs
become available as track input sources).
3. Repeat this process for as many additional outputs that you need to monitor.
If you encounter any problems performing the steps above, please consult your host’s documentation or contact the
manufacturer’s tech support channels – the DCAM: Synth Squad plugins operate in the same way as any other instrument
plugins.
Recording the output as audio
To do this you must use Logic’s bounce functions (see the Logic documentation).
Using DCAM: Synth Squad as AU plugins in Apple Logic 8
Launching a plugin
1. Create a new Instrument track and insert the Strobe, Cypher, Amber or Fusor AU plugin onto it. You can now play the plugin
from this track.
Setting up additional output monitoring for Fusor
The instrument channel’s output plays the output of all Fusor channels. To assign the other channels, follow this procedure:
1. Create a stereo Aux channel.
2. Set the input of the Aux channel as the stereo output from Fusor (after it is inserted into the project, its outputs become
available as track input sources).
3. Repeat this process for as many additional outputs that you need to monitor.
If you encounter any problems performing the steps above, please consult your host’s documentation or contact the
manufacturer’s tech support channels – the DCAM: Synth Squad plugins operate in the same way as any other instrument
plugins.
Recording the output as audio
To do this you must use Logic’s bounce functions (see the Logic documentation).