background image

 

iv

FOREWORD 

A Word to the Owner of the RP-250 

FURUNO Electric Company thanks you for purchasing the RP-250 Video Plotter. We are 
confident you will discover why the FURUNO name has become synonymous with quality 
and reliability. 
 
For over 50 years FURUNO Electric Company has enjoyed an enviable reputation for 
quality and reliability throughout the world. This dedication to excellence is furthered by 
our extensive global network of agents and dealers. 
 
Your equipment is designed and constructed to meet the rigorous demands of the marine 
environment. However, no machine can perform its intended function unless properly 
installed and maintained. Please carefully read and follow the operation, installation and 
maintenance procedures set forth in this manual. 
 
We would appreciate feedback from you, the end-user, about whether we are achieving 
our purposes. 
 
Thank you for considering and purchasing FURUNO. 

 
 

Features 

The main features are 

• 

Storage for 100 waypoints (two are automatically assigned), 20,000 marks, 20,000 

own ship track points, 20,000 target track points, 30 nav lines. 

• 

AIS feature (requires AIS transponder) provides navigation data about AIS-equipped 

targets. 

• 

Memory cards for recording, replaying data. 

Содержание RP-250










































































Отзывы: