Furuno NAVpilot-300, Руководство оператора

Страница: 23 / 101

2. STEERING MODES
2-3
Note 1: During AUTO mode, if , , or is pressed, the following
associated message appears. The turn angles shown in the below messages are
based on factory default settings. To start the turn, press the appropriate key once
more.
Note 2: The above operation is available from the GC-001. See section 5.9.
The Control Unit releases a “beep” sound (requires [Key Beep] in the [System Setup]
menu to be set to [ON]) under the following conditions:
• The mode is changed to AUTO mode from external equipment.
• The set course is changed from external equipment.
Note 3: While AUTO mode is active, if a route or destination is selected from a con-
nected GPS navigator, NAV mode becomes available. A confirmation message ap-
pears. Press , or as appropriate.
Note 4: You can also activate AUTO mode from the [TURN] menu. Press to
show the [TURN] menu, then select [AUTO] ( ).
: "Starting STBD turn (90°)"
: "Starting STBD turn (150°)"
: "Starting PORT turn (90°)"
: "Starting PORT turn (150°)"
1 1
10 10
1
10
1
10
1 1
STBY