Furuno NAVpilot-300, Руководство оператора, Страница: 31 / 101

2. STEERING MODES
2-11
2.5 FishHunter
™
Mode
2.5.1 How to select a FishHunter
™
turn and start the turn
FishHunter
™
mode can be activated from STBY, AUTO or NAV modes and can be
adjusted to turn either to port or starboard (direction cannot be set for Zigzag turns).
1. Press the MENU key ( ) to show the Turn menu.
2. Select the desired turn.
The cursor-selected item is highlighted with a blue box.
For details on each turn, see section 2.5.2.
3. If you want to change the parameters for the turn, do 1) - 4) below. If you do not
need to change the parameters, go to step 4 of this procedure.
1) Press to the show the setting menu for the turn. If a setting menu does
not appear, the parameters for that turn cannot be changed.
2) Select the parameter you want to change. A popup window appears.
3) Set the parameter as desired.
4) Select [RUN] to start the turn, or press to go back to the settings.
4. Press to start the turn. The message "Fish Hunter mode activated." appears.
Note: The orbit and spiral turns require that the speed of the boat be less than 10
knots. If the speed is higher, the message "Too fast for this mode. Reduce speed
to less than 10 knots." appears. Reduce the boat’s speed to less than 10 knots.
The Own Ship indication moves during turns, as an indication that the boat is turning.
This is not always an accurate depiction of the direction in which the boat is facing, or
of the boat location.
To escape from the turn, press . The message "Turn complete" appears.
Note: Operation from the GC-001 is available in TURN mode. See section 5.4.
The FishHunter
™
mode is a unique feature of FURUNO’s NAVpilot series. Find a fish
target with your FURUNO sonar/sounder or bird target with your FURUNO radar and
feed it to the NAVpilot. The NAVpilot will activate the FishHunter
™
mode to perform or-
bit, spiral, figure eight or zigzag maneuvers around the specified target.
㻿 㻼
㻼 㻿 㻼
㻿
㻼 㻿 㻼 㻿
Turn 180°
to PORT* SABIKI Turn 180°
to STBD*
Spiral Turn
to PORT Spiral Turn
to STBD Figure-8 Turn
to PORT
Figure-8 Turn
to STBD
Zigzag Turn
Turn 90°
to PORT* Turn 90°
to STBD* Orbit Turn
to PORT
Orbit Turn
to STBD
*: Turn angle for these turns depends on menu setting.
The default for Turn1 turns is 180° and the default for Turn2 turns is 90°.
10
10
STBY