Furuno NAVpilot-300, Руководство оператора

Страница: 69 / 101

5. GESTURE CONTROLLER GC-001
5-11
The turn direction and bearing indications on the GC-001 also change according-
ly. The example below shows a starboard turn.
There are three turn indicator boxes to both port and starboard. Depending on the
size of the turn, the boxes fill accordingly.
4. Release .
The heading at which the key is released becomes the set heading.
5.8 How to Connect (Pair) the GC-001 with Your
NAVpilot-300
The NAVpilot-300 system communicates with the GC-001, via Bluetooth
®
. To use the
GC-001 with your NAVpilot-300, they must be paired. A maximum of three GC-001s
can be connected to the processor unit. Your NAVpilot system is supplied with one
GC-001 which is paired at installation.
Note: Where more than one GC-001 is paired to your system, to avoid simultaneous
operation, the last-received remote signal is used for operation.
To pair a new GC-001 with the system, follow the procedure below.
1. On the NAVpilot-300, open the menu.
2. Select [Wireless RC]. GC-001s which are paired with your NAVpilot-300 are list-
ed. Your NAVpilot-300 system is already connected to one GC-001 and the con-
nected GC-001 appears at the top of the list. Available connections appear blank
(indicated as “bars”).
NP300-RC
P S
AUTO
SET CSE
23
NP300-RC
P S
AUTO
SET CSE
28
The turn indicators
(boxes) fill to show
the size and
direction of the turn.
Prev Ent
Wireless RC
▼
GC-001 40F671792BE0
㻙㻙㻙㻙㻙㻙㻙㻙㻙㻙㻙㻙㻙㻙㻙㻙㻙㻙㻙㻙㻙㻙
㻙㻙㻙㻙㻙㻙㻙㻙㻙㻙㻙㻙㻙㻙㻙㻙㻙㻙㻙㻙㻙㻙
Remote1:
Remote2:
Remote3:
The GC-001 which was
paired at installation
appears here.