Furuno DS-60 Скачать руководство пользователя страница 13

Страница: 13 / 94

1. INTRODUCTION

1-3

1.1.2

Remote Controller RD-501 (option)

1.1.3

Dimmer Controller RD-502 (option)

No.

Control

Function

DISP

•  Select a display.
•  Close the menu and return to last-used display.
•  In multiple data displays, select a data indication to change its unit of

measurement (with the

UNIT

key).

UNIT

Select the unit of measurement for speed, depth, distance, current (tide)
speed, wind speed, etc.

MODE

•

Main display unit:

Select the tracking mode (ground, water, or auto) for

the measurement of ship speed.

•

Sub display unit:

Select the tracking mode to ground tracking or water

tracking when the tracking mode at the main display unit is ground tracking.

No.

Control

Function

DAY/NT

Select the daytime and nighttime displays alternately.

Adjust the screen brilliance.

to decrease the brilliance,

to increase the

brilliance. To quickly increase or decrease the brilliance, press and hold the
related key.

DISP

REMOTE CONTROLLER

RD-501

UNIT

MODE

DAY

BRILL

DIMMER CONTROLLER

RD-502

Содержание DS-60































































































Результаты поиска

Содержание DS-60

Отзывы:

Похожие инструкции для DS-60

Бренды по названию

Популярные бренды

Furuno DS-60, Руководство оператора

Результаты поиска

Содержание DS-60

Отзывы:

Похожие инструкции для DS-60

Бренды по названию

Популярные бренды