Full Vision TRACK MASTER FVX328, Руководство пользователя

Страница: 30 / 79

Preventive Maintenance TRACKMASTER
6-6
FVX328 Series Owner’s Manual May, 2008
Exterior Care
The TGIC-Polyester powder-coat finish on your TRACKMASTER
®
treadmill is an
extremely durable finish and requires minimal care. Do not allow perspiration to build up
on your treadmill. Wipe the unit daily.
Elevation Screw Lubrication
This procedure requires the following tools:
•
Trackmaster grease (Part # 317-160-165)
•
Clean, lint-free cloth
•
Small paint brush
Clean and lubricate the treadmill elevation screw once every year. In high-use
environments, clean and lubricate it once every 6 months.
1. Raise the treadmill to its maximum elevation.
2. Turn the main power switch to the OFF position, and unplug the treadmill from its
outlet.
3.
Using a lint-free cloth, remove the old lubricant and accumulated dust from the
elevation screw.
4. Use a small brush to reapply a thin coat of grease to the threads of the elevation screw.
Do not use too much grease—the excess could squeeze onto the floor and create a
slip-and-fall hazard.
5. Return the unit to service.