Full Vision TRACK MASTER FVX328, Руководство пользователя

Страница: 21 / 79

TRACKMASTER Assembly and Setup
May, 2008 FVX328 Series Owner’s Manual
5-3
Power Requirements
Your TRACKMASTER
®
treadmill operates on a 200-240VAC, 15-amp (13 amp-
Europe) service. The treadmill requires an approved outlet (see Chapter 4, “Grounding
Instructions”) that is properly grounded, includes a 15-amp (13 amp-Europe) circuit
breaker.
No other equipment may be used on the treadmill circuit. Do not use extension cords.
Using an ungrounded, shared, or otherwise improper circuit will void the machine's
warranty and may result in major damage to your treadmill's electronic circuits. Using
a shared circuit can also cause the treadmill to unexpectedly shut off, resulting in
injury to the user.
Ensure that power cords do not cross traffic areas. Exposed power cords can cause a
fall, resulting in injury.
Before plugging the power cord into its power outlet, ensure that the treadmill master
power switch is in the OFF position . A power surge through the treadmill electronics
could trip the treadmill’s circuit breakers.
Final Setup Test Plug Procedure
Each TRACKMASTER
®
FVX328 treadmill includes an RS-232 plug that enables you
to test the operation of the treadmill without the ECG unit attached. The plug is located
to the right of the main power switch secured to the frame by Velcro. The plug is to be
used
only for testing the treadmill. Do not stand on or use the treadmill while testing.
Note:
This procedure will not work with FVX328C or FVX328CP.