Full Spectrum Laser Muse Galvo Скачать руководство пользователя страница 32

Страница: 32 / 50

Technical Support is available from 8am to 5pm (PST) M - F at [email protected].

SECTION VI. SOFTWARE

Using RetinaEngrave v3.0 Software

In this section you will be introduced to the major interface features of RetinaEngrave

v3.0.

Figure 6.1

RetinaEngrave v3.0 Software

Technical Support is available 8am-5pm PST. Monday - Friday

[email protected]

•

702-802-3103

Indicators (Bottom Row)

(E)

Position Indicator: Displays current position of the laser on the grid.

Technical Support is available from 8am to 5pm (PST) M - F at [email protected].

Raster Properties Window

Halftone Dither:

Apply Halftone Dither.

Threshold:

Apply Threshold.

Blur:

Adjust blur filter radius from 0 to 30.

Edge:

Adjust edge enhancement threshold from 0 to 30.

Intensity:

Adjust intensity from -255 to 255.

Invert:

Reverse Black and White elements.

Resolution:

Set resolution (250, 500, 1000 dpi).

Poser %:

Select power percentage from 1 to 100.

Speed%:

Select speed percentage from 1 to 100.

B/W Threshold:

Select black and white threshold from 0 to

255.

Indicators (Bottom Row)

Position Indicator:

Displays current position of the laser on the grid.

Time Remaining Indicator:

Displays the time remaining to complete the current job

Status Indicator:

Displays whether laser is ready to initiate a job or is currently executing a job.

Sync Indicator:

Machine Indicators:

Displays information on connected devices.

Device Connection Available:

Lid Indicator:

Tells operator if lid is open or closed.

Water Flow Indicator:

Tells operator if water is flowing through the laser tube or not.

Technical Support is available from 8am to 5pm (PST) M - F at [email protected].

Raster Properties Window

Halftone Dither:

Apply Halftone Dither.

Threshold:

Apply Threshold.

Blur:

Adjust blur filter radius from 0 to 30.

Edge:

Adjust edge enhancement threshold from 0 to 30.

Intensity:

Adjust intensity from -255 to 255.

Invert:

Reverse Black and White elements.

Resolution:

Set resolution (250, 500, 1000 dpi).

Poser %:

Select power percentage from 1 to 100.

Speed%:

Select speed percentage from 1 to 100.

B/W Threshold:

Select black and white threshold from 0 to

255.

Indicators (Bottom Row)

Position Indicator:

Displays current position of the laser on the grid.

Time Remaining Indicator:

Displays the time remaining to complete the current job

Status Indicator:

Displays whether laser is ready to initiate a job or is currently executing a job.

Sync Indicator:

Machine Indicators:

Displays information on connected devices.

Device Connection Available:

Lid Indicator:

Tells operator if lid is open or closed.

Water Flow Indicator:

Tells operator if water is flowing through the laser tube or not.

Technical Support is available from 8am to 5pm (PST) M - F at [email protected].

Raster Properties Window

Halftone Dither:

Apply Halftone Dither.

Threshold:

Apply Threshold.

Blur:

Adjust blur filter radius from 0 to 30.

Edge:

Adjust edge enhancement threshold from 0 to 30.

Intensity:

Adjust intensity from -255 to 255.

Invert:

Reverse Black and White elements.

Resolution:

Set resolution (250, 500, 1000 dpi).

Poser %:

Select power percentage from 1 to 100.

Speed%:

Select speed percentage from 1 to 100.

B/W Threshold:

Select black and white threshold from 0 to

255.

Indicators (Bottom Row)

Position Indicator:

Displays current position of the laser on the grid.

Time Remaining Indicator:

Displays the time remaining to complete the current job

Status Indicator:

Displays whether laser is ready to initiate a job or is currently executing a job.

Sync Indicator:

Machine Indicators:

Displays information on connected devices.

Device Connection Available:

Lid Indicator:

Tells operator if lid is open or closed.

Water Flow Indicator:

Tells operator if water is flowing through the laser tube or not.

Technical Support is available from 8am to 5pm (PST) M - F at [email protected].

Raster Properties Window

Halftone Dither:

Apply Halftone Dither.

Threshold:

Apply Threshold.

Blur:

Adjust blur filter radius from 0 to 30.

Edge:

Adjust edge enhancement threshold from 0 to 30.

Intensity:

Adjust intensity from -255 to 255.

Invert:

Reverse Black and White elements.

Resolution:

Set resolution (250, 500, 1000 dpi).

Poser %:

Select power percentage from 1 to 100.

Speed%:

Select speed percentage from 1 to 100.

B/W Threshold:

Select black and white threshold from 0 to

255.

Indicators (Bottom Row)

Position Indicator:

Displays current position of the laser on the grid.

Time Remaining Indicator:

Displays the time remaining to complete the current job

Status Indicator:

Displays whether laser is ready to initiate a job or is currently executing a job.

Sync Indicator:

Machine Indicators:

Displays information on connected devices.

Device Connection Available:

Lid Indicator:

Tells operator if lid is open or closed.

Water Flow Indicator:

Tells operator if water is flowing through the laser tube or not.

Technical Support is available from 8am to 5pm (PST) M - F at [email protected].

Raster Properties Window

Halftone Dither:

Apply Halftone Dither.

Threshold:

Apply Threshold.

Blur:

Adjust blur filter radius from 0 to 30.

Edge:

Adjust edge enhancement threshold from 0 to 30.

Intensity:

Adjust intensity from -255 to 255.

Invert:

Reverse Black and White elements.

Resolution:

Set resolution (250, 500, 1000 dpi).

Poser %:

Select power percentage from 1 to 100.

Speed%:

Select speed percentage from 1 to 100.

B/W Threshold:

Select black and white threshold from 0 to

255.

Indicators (Bottom Row)

Position Indicator:

Displays current position of the laser on the grid.

Time Remaining Indicator:

Displays the time remaining to complete the current job

Status Indicator:

Displays whether laser is ready to initiate a job or is currently executing a job.

Sync Indicator:

Machine Indicators:

Displays information on connected devices.

Device Connection Available:

Lid Indicator:

Tells operator if lid is open or closed.

Water Flow Indicator:

Tells operator if water is flowing through the laser tube or not.

Time Remaining Indicator: Displays the time remaining to complete the current job

Status Indicator: Displays whether laser is ready to initiate a job or is currently executing a job.

Sync Indicator: Notifies you of the last workspace update operation results. “Press Sync” to sync immediately. The workspace
will update automatically, periodically.

Machine Indicators: Displays information on connected devices.
Device Connection Available: Indicates connection to machine is successful.

Jog Controls

(J)

Video Feed

(I)

Use this window to view realtime display.

This tool is for moving the culminator and
camera along the Z-Axis (up and down)

Содержание Muse Galvo



















































Результаты поиска

Содержание Muse Galvo

Отзывы:

Бренды по названию

Популярные бренды

Full Spectrum Laser Muse Galvo, Руководство по эксплуатации

Результаты поиска

Содержание Muse Galvo

Отзывы:

Бренды по названию

Популярные бренды