manualshive.com logo in svg

Full Spectrum Laser Muse Galvo, Руководство по эксплуатации

Поделиться
Скачать
Full Spectrum Laser Muse Galvo Скачать руководство пользователя страница 11

Technical Support is available 8am-5pm PST. Monday - Friday

 

 [email protected]

   •   

702-802-3103

   

10

Section II. Installation & Assembly

Machine Connection

Machine Connection

The Muse Pandora utilizes RetinaEngrave v3.0, a browser-based software which doesn’t require any 
downloads. Only two items are required in order to access RetinaEngrave v3.0: a computer with access to 
an internet browser (Google Chrome recommended) and a connection between the Muse Pandora and the 
internet or said computer.

Connect to Wi-Fi 

Connecting to the Muse Pandora via Wi-Fi is the secondary way to establish a link to RE3.

1. Tap Network on the Muse Pandora Screen.
2. Click Wi-Fi and the machine will automatically search for networks.

 

3. Select the preferred connection from the list and enter the proper password in order to connect to Wi-Fi.The 

machine will now have internet connection and is ready to connect to RetinaEngrave v3.0

Connect Via Router (Recommended):

Connecting to the Muse Pandora via the router is the most reliable way to establish a link to RE3.

1. Locate and remove the included Ethernet cable from its packaging.

2. Plug the Ethernet cable into the Ethernet slot on the Muse Pandora.

3. Plug the other end of the Ethernet cable into your router’s Ethernet slot.

Connect Directly to Computer
A direct connection between the Muse Pandora and the computer should only be done if the previous two 

options are not possible.

1. Locate and remove the included Ethernet cable from its packaging.

 

2. Plug the Ethernet cable into the Ethernet slot on the Muse Pandora.

3. Plug the other end of the Ethernet cable into your computer’s Ethernet slot.

Содержание Muse Galvo



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды