manualshive.com logo in svg

Full Spectrum Laser Muse Galvo, Руководство по эксплуатации

Поделиться
Скачать
Full Spectrum Laser Muse Galvo Скачать руководство пользователя страница 14

Technical Support is available 8am-5pm PST. Monday - Friday

 

 [email protected]

   •   

702-802-3103

   

13

Section II. Installation & Assembly

Removable Base Plate 

The Muse Pandora has a removable base plate. 
Removing the base plate allows the machine 
to have more height to engrave items. This 
also allows the use of lenses with higher focal 
lengths. If the base plate is removed then the 
machine has to be recalibrated. 

The Muse Pandora Table

Is purchased separately. The table has several mounting 

points which can be used to mount the Muse Pandora.

This option is the ideal setup when using the 
rotary. It’s practical for engraving tall objects 
and/or using lenses with high focal lengths 
because it allows you more vertical freedom 
in placing objects since they don’t have to be 
placed in the machine. The table is an accessory 
for the Muse Pandora that can be bought 
separately. The table has mounting points which 
allows you to mount the Muse Pandora. The 
table’s height can be adjusted with the controls 
on the table. The table is extremely useful if you 
want to engrave with the Muse Pandora with 
the base plate removed. Its design allows the 
Muse Pandora to be secured to it and leaves the 
underside of the machine open for engraving 
material. The machine has to be calibrated after 
it is set up on the table and the base plate is 
removed.

Optional - Removable Base Plate

Removable Base Plate

Содержание Muse Galvo



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды