manualshive.com logo in svg

Full Spectrum Laser Muse Galvo, Руководство по эксплуатации

Поделиться
Скачать
Full Spectrum Laser Muse Galvo Скачать руководство пользователя страница 30

Technical Support is available from 8am to 5pm (PST) M - F at [email protected].

 

47

 

 SECTION VI. SOFTWARE 

Using RetinaEngrave v3.0 Software

 

In this section you will be introduced to the major interface features of RetinaEngrave 

v3.0.

 

Figure 6.1

 

RetinaEngrave v3.0 Software

Technical Support is available 8am-5pm PST. Monday - Friday

 

 [email protected]

   •   

702-802-3103

   

29

Project Info 

(H)

This window displays information regarding the active project.

Active Project Name: Displays name of active project. 
Modified: Displays last date project was modified. 
Job Time Estimate: Displays estimated time until job is complete.

Unit: Choose unit of measurement from the following 
 Pixels: Sets unit of measurement to pixels. 
 

Centimeters: Sets unit of measurement to centimeters.  

 

Millimeters: Sets unit of measurement to millimeters.

 Inches: 

Sets unit of measurement to inches.

 Picas: 

Sets unit of measurement to picas.

 Points: 

Sets unit of measurement to points.

Grid: Toggles grid on/off/isometric.
 On: 

When “on” grid displays in workspace.

 Off: When “off” grid does not display in workspace.
 Isometric: Toggles grid from squares to isometric grid.
Width: Displays width of item according to chosen unit of measurement.
Height: Displays height of item according to chosen unit of measurement

Window appears when vector file is detected and is used to input vector settings.

Hide Window: Click to hide vector engraving parameters window.
Show All Parameters: Toggle to show or hide all parameters.
Change Position: Drag with mouse to reorder any color. 
Color Indicator: Separates vector cuts with color indicators. 
Speed: Input speed settings.
Power: Input power settings.
Passes: Input the number of passes for the laser.
Pulse: Input the pulse rate settings.

Vector Engraving & Parameters 

(G)

Содержание Muse Galvo



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды