Full Boar FBDDP-7500, Инструкция по эксплуатации

Страница: 8 / 28

8
1. The bench drill was designed in such a way so as to all but eliminate potential hazards
when the machine is properly used. However, there are a few safety precautions to
observe in order to ensure that all residual hazards are ruled out.
2. Ensure proper voltage
. The voltage must comply with the specifications on the rating
plate.
3. Protection against electrical shock:
Keep the device away from moisture. The device
must neither be damp nor be operated in a humid environment. Prior to every use,
check the device and the mains cable with plug for damage. Avoid bodily contact with
earthed parts e.g. pipes, hot elements, etc.
4. Protection against fire and explosion:
There are spark producing components inside
the device. Do not use the device in the vicinity of combustible liquids or gases.
Otherwise there is a risk of fire or explosion.
5. Handle the device with care: Do not use the cable to pull the plug out of the socket.
Protect the cable from heat, oil and sharp edges. Keep your tools sharp and clean so
that you can work efficiently and safely. Follow the maintenance regulations and the
instructions for changing tools.
6. Wear suitable work clothes and personal protection equipment:
Loose clothing is
not suitable, as it can be caught by moving parts, causing you to become entangled.
Wear a hair net if you have long hair. As a general rule, jewellery should not be worn
when working with machine tools. Ensure that you wear safety goggles. Not doing so
could result in eye injury.
7. Store the tools in a safe location: Store unused devices in a dry, locked location that is
out of the reach of children.
8. Avoid overloading the device: Operate the device only within the specified output
range. Do not use any low-powered machines for heavy duty work. Do not use tools to
perform work for which they were not intended.
9. Maintain a steady foothold:
Ensure that you maintain a steady foothold while working.
Avoid abnormal body positions and always keep your balance.
10. Pull out the mains plug:
Pull out the mains plug when not using the tool, prior to
maintenance, and when changing the drill bit.
ADDITIONAL SAFETY RULES FOR BENCH DRILLS
IMPORTANT!
When using the equipment, a few safety precautions must be
observed to avoid injuries and damage. Please read the complete operating manual
with due care. Keep this manual in a safe place so that the information is available at
all times. If you give the equipment to any other person, give them these operating
instructions as well.
We cannot accept any liability for damage or accidents which arise due to a failure
to follow these instructions and the safety information.
WARNING! Using any plug-in tools and accessories other than those specified in
these operating instructions can lead to injury.