Fukuda Denshi HR-800, Руководство по обслуживанию

Страница: 66 / 70

●
Daily Check List
Daily Check List
No.
Inspected Date Inspected by Location
Device Type Serial No.
Purchased Date
Item Details Criteria Judgment
Appearance Visually check the exterior for
scratches, cracks, deformation, and
rust. No abnormality should be found.
□ OK / □ NG
Installation Check if the unit is installed on a level
surface. The unit should be levelled and
stable.
□ OK / □ NG
Check if the unit is installed in a place
not susceptible to adverse environment. The environmental condition (ex.
temperature, humidity) of the
installed place should be as
specified. The unit should not be
subjected to splashing water.
□ OK / □ NG
Pressing the or
key should light the “Recorder
Busy” indicator and start the
printing. Pressing the key again
should stop the printing.
□
OK /
□
NG
Pressing the or key
should light the “Feed” indicator
and starts the feeding.
□
OK /
□
NG
Functions Turn ON the power of the monitor
and check that it functions properly.
Install a small amount of paper
inside the cassette and press the
or key. The paper
out status should be detected,
or indicator
should light in orange and printing
should stop.
□ OK / □ NG
Cables Visually check all cables for any
damage. No damage should be found.
□
OK /
□
NG
Periodic Inspection Check the date of previous periodic
inspection. Should be within 1 year.
□
OK /
□
NG
Comment
12 － 4