mgmt_passwd
Enter the password of the remote management controller (ILOM/XSCF) to manage a server.
-
For XSCF
Enter up to 32 characters, including alphanumeric characters, blank spaces (" "), and any of the following symbols.
-
For ILOM
Enter between 8 and 16 characters, including alphanumeric characters, blank spaces (" "), and any of the following symbols.
"!", "@", "#", "$", "%", "^", "&", "*", "[", "]", "{", "}", "(", ")", "-", "+", "=", "~", ",", ">", "<", "/", "'", "?", ";", ":"
mgmt_passwd_enc
Enter one of the following.
-
If mgmt_passwd is plain text
"plain"
-
If the password is encrypted
"encrypted"
SPARC M10-1/M10-4 Management Data
-
Section Name
Enter [SPARCM10] as the section name.
-
Section Header
operation
Enter the desired operation for the current line. Enter a hyphen ("-") to skip this line.
server_name
Enter the resource name that will be used to identify the server. Enter a character string beginning with an alphabetical character
and containing up to 15 alphanumeric characters and hyphens ("-").
ip_address
Enter the same IP address as that set within the server's operating system. Enter a string of numeric values (between 0 and 255)
and periods.
mgmt_snmp_community_name
Enter the name of a SNMP community (with read permission) configured on this server's remote management controller (XSCF).
Enter a string of up to 32 alphanumeric characters, underscores ("_"), and hyphens ("-").
mgmt_ip_address
Enter the IP address of this server's remote management controller (XSCF).
Enter a string of numeric values (between 0 and 255) and periods.
Note
IP addresses should be unique between all resources.
mgmt_protocol
Enter the type of the remote management controller (XSCF) to manage servers.
Enter "XSCF".
mgmt_user_name
Enter the name of a remote management controller (XSCF) user account with administrative privileges (platadm privileges).
- 367 -
