Fujitsu MPG3102AH, Руководство по эксплуатации продукта

Страница: 26 / 195

C141-E112-01EN 1 - 9
1.6 Shock and Vibration
Table 1.6 lists the shock and vibration specification.
Table 1.6 Shock and vibration specification
Vibration (swept sine, one octave per minute)
• Operating
• Non-operating
4.9 m/s
2
(0.5G0-P); 5 to 300 Hz
(without non-recovered errors)
39.2 m/s
2
(4.0G0-P); 5 to 400 Hz (no damage)
Shock (half-sine pulse, Operating)
• 2 ms duration 392 m/s
2
(40G0-P) (without non-recovered error)
Shock (half-sine pulse, Non-operating)
• 2 ms duration 2940 m/s
2
(300G0-P) (Typical, no damage)
1.7 Reliability
(1) Mean time between failures (MTBF)
The mean time between failures (MTBF) is 500,000 POH (power on hours) or more (operation:
24 hours/day, 7 days/week).
This does not include failures occurring during the first three months after installation.
MTBF is defined as follows:
MTBF= (H)
"Disk drive defects" refers to defects that involve repair, readjustment, or replacement. Disk drive
defects do not include failures caused by external factors, such as damage caused by handling,
inappropriate operating environments, defects in the power supply host system, or interface cable.
(2) Mean time to repair (MTTR)
The mean time to repair (MTTR) is 30 minutes or less, if repaired by a specialist maintenance
staff member.
(3) CSS cycle
The number of CSS must be less than 50,000.
Total operation time in all fields
number of device failure in all fields