Chapter 8 Operational Settings
135
Cleaning Cycle
Specify the scanner cleaning cycle.
Select whether or not to display the cleaning
instruction message from the scanner driver.
1,000 to 255,000 sheets
(in increments of 1,000)
Show cleaning instructions: Selected/Not
selected
5,000 sheets
Not selected
Life Counter Alarm Setting
Specify the replacement cycle for the
consumables.
Pick Rollers/Brake Rollers:
10,000 to 2,550,000 sheets
(in increments of 10,000)
Pick Rollers:
200,000 sheets
Brake Rollers:
200,000 sheets
Pick Speed
When multifeeds and paper jams occur
frequently, you may be able to improve the
performance by slowing down the speed in
which documents are picked or fed.
Normal/Slow
Normal
AutoCrop Boundary
Specify whether or not to optimize (round up/
down) the fractional part of the scanned image
data.
Optimize/Round Down
Optimize
Manual-feed timeout
Select whether to disable or enable manual
feeding.
Disable/Enable
Disable
Paper-out detection time: Specify the waiting
time to cancel manual feeding.
5, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110
(seconds)
10 seconds
Power SW Control
Specify the method by which the scanner is
powered on/off.
Enable power switch/Disable power switch/
Enable USB power feeding
Enable power
switch
Paper Protection
Select whether to disable or enable paper
protection.
When enabled, this function reduces the risk of
having the documents damaged by stopping
the scan when the scanner detects a document
that is unusually warped when a feeding error
occurs.
In manual feed mode, the paper protection
setting is disabled.
This setting can also be configured in the
scanner driver. Note that the highest priority is
given to the scanner driver setting.
Enable/Disable
Enable
Item
Description
Parameter/Value
Factory Default
