Fujitsu fi-7140, Руководство оператора

Страница: 147 / 182

Chapter 8 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
147
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Number of Paper Feeding Retries
Configure this setting to change the number of feeding retries
when a pick error occurs.
1
Start up the Software Operation Panel.
For details, refer to "8.1 Starting Up the Software Operation Panel"
(page 123) .
2
From the listing on the left, select [Device Setting 2] 
[Number of paper feeding retries].
3
Specify the number of paper feeding retries.
The value can range from 1 to 12 times.
Document Feed Speed [Pick Speed]
When multifeeds and paper jams occur frequently, you may be
able to improve the performance by slowing down the speed
in which documents are picked or fed.
This setting is effective when you scan thin paper.
1
Start up the Software Operation Panel.
For details, refer to "8.1 Starting Up the Software Operation Panel"
(page 123) .
2
From the listing on the left, select [Device Setting 2] 
[Pick Speed].
3
Specify the document feed speed.
Normal: Normal document feed speed
Slow: The document feed speed is slower than normal
ATTENTION
The total time for scanning is longer because the document feed
speed slows down.