Chapter 8 Operational Settings
137
Checking and Resetting the Sheet Counters
■
Checking the Sheet Counters
The status of each consumable part can be viewed to
determine when to replace or clean the consumables.
The color of the counter gradually changes when a
replacement for a consumable is needed or when cleaning is
needed. The color of each counter changes as follows:
Brake roller counter/pick roller counter
These counters turn light yellow when the page count after the
consumable replacement reaches 95% of the value specified in
"Replacement Cycle of Consumables [Life Counter Alarm Setting]"
(page 140)
in the Software Operation Panel, and turn yellow when the
page count reaches 100%.
Cleaning counter
This counter turns yellow when the page count after cleaning reaches
100% of the value specified in
"Scanner Cleaning Cycle [Cleaning
in the Software Operation Panel.
Ink counter
This counter turns yellow when the amount of remaining ink reaches
below 33% (only displayed when the imprinter is installed).
1
Start up the Software Operation Panel.
For details, refer to
"8.1 Starting Up the Software Operation Panel"
2
From the listing on the left, select [Device Setting].
In this window, you can check the following items:
8.4 Settings Related to Sheet Counters
Item
Description
Total Count (ADF)
Approximate total number of sheets
scanned through the ADF
Total Count (FB)
(fi-7240)
Approximate total number of sheets
scanned on the flatbed (fi-7240)
After cleaning
Approximate total number of sheets
scanned after cleaning
