Fujitsu ETERNUS CS800 S5, Руководство пользователя

Страница: 318 / 634

System Configuration
304
U41840-J-Z125-7-76
Changing CLI Passwords
Use the CLI passwords when logging onto the command line interface as an administrator
or monitor.
To change the CLI passwords:
1. Under CLI Administrator Login Settings or under CLI Monitor Login Settings ,
select the Change password option.
2. Enter the following information:
●
Old Password - Enter the old password.
●
New Password - Enter the new password.
●
Confirm New Password - Enter the new password again to confirm it.
I
The default password for the CLI Administrator account is spcc . The default
password for the CLI Monitor account is password .
I
Passwords are limited to 15 characters. All alphanumeric characters are
allowed, as well as underscores (
_ ) and hyphens ( - ).
3. Click Apply .
Resetting CLI Passwords
The default password for the CLI Administrator account is spcc . The default password for
the CLI Monitor account is password .
To reset the CLI account passwords to their default values:
1. Under CLI Administrator Login Settings or under CLI Monitor Login Settings ,
select the Reset password to factory default option.
2. Click Apply .
SSL
The SSL page allows you to enable or disable SSL on the ETERNUS CS800. You can also
install a new SSL certificate to replace the Fujitsu Technology Solutions default SSL certif-
icate.
To access the SSL page, on the Security page, click the SSL tab (see Figure 187 ).