95
PRIMERGY RX600 S4 User's Guide
4.5 Notes before Operating the
Server
`
For the settings of the installed application software supplied with the server, refer to the manuals of
each of them.
`
For notes on ServerView security, refer to "Security" in Section "1.1.7 Note", "ServerView User's
Guide".
4.5.1 Auto-run Function from CD/DVD Drives
Perform the following procedures to change the settings of the auto-run function from the CD/DVD
drives after server installation.
1
Make the registry editable, and change the value of AutoRun of the following
registry key:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\CDRom
Set the value of AutoRun to "1" to enable auto-run, or to "0" to disable auto-run.
2
Restart the system.
The setting is enabled after the system restarts.
Содержание 1PRIMERGY RX600 S4
