8
U41169-J-Z156-4-74
Target Group
Introduction
1.1
Target Group
The operating instructions are intended for the person responsible for installing
the hardware and correctly operating the system. The operating instructions
contain all the descriptions which are of importance for commissioning your
PRIMERGY SX30 storage subsystem in so far as they do not form part of the
publication of your server system.
To understand the different expansion options it is necessary to have a
knowledge of hardware and data transmission, as well as basic knowledge of
the operating system used.
1.2
Structure of the Manual
The PRIMERGY SX30 storage subsystem manual describes how to install and
configure the subsystem and perform expansions or upgrades.
You will find further information (see also entries in the chapter
):
●
in the “Safety and Ergonomics” manual
●
in the documentation on the PRIMERGY server
This manual consists of the following chapters:
●
Important notes
This chapter contains instructions on the safe operation of your storage
subsystem as well as information about environmental protection.
●
Operating and indicator elements
This chapter gives a detailed description of the operating panel and the
connecting elements on the rear panel of the corresponding storage
subsystem.
●
Floorstand model
This part of the manual describes how opening and closing the floorstand
model housing.
●
Power supply
This part of the manual describes the power supply units and their power
supply. Fitting and removing power supply units is also described in detail.
●
Fan module
This part of the manual describes the fitting and removal of the fan module.
