2006. Mar
3
1-3
Make sure that the FLA-7000 has completed the warm-up. (Only
the power lamp on the upper left panel on the front of the FLA-
7000 is lit up when the warm-up is completed.)
Then, perform the procedures below.
For the Windows version:
Start the Image Reader FLA-7000 software from the
Startup menu, or use the shortcut key.
For the Macintosh version:
Double-click the alias or the software to start the
Image Reader FLA-7000 software.
Note:
After starting the Image Reader, its condition is displayed in the
Status area.
• When disconnected:
Cannot recognize FLA-7000. Please check connection and power.
• During warm-up:
FLA-7000 is in self-diagnosis. Please wait.
• When reading is possible:
Ready
1-4
The main window of the Image Reader FLA-7000 software is
displayed.
1. Starting the Image Reader
Software
Shortcut Key
Alias
Содержание FLA-7000
