FujiFilm FLA-7000, Руководство по эксплуатации

Страница: 12 / 58

8
2006. Mar
2. Setting the IP on the IP Stage/3. Setting the IP Stage on the FLA-7000
Estimated time until reading finishes.
Size of the file.
Drag and select the scanning area on the IP stage.
Note:
Select this to specify the reading area based on the 2.5
cm grid lines on the IP stage.
Select this to specify the reading area arbitrarily.
Select this to specify a reading area of 20 cm x 25 cm.
Select this to specify a reading area of 20 cm x 40 cm.
: Use this button when saving the reading conditions in a file. You
may save reading conditions that are used frequently with this
function and recall them later with .
: Use this button when recalling reading conditions saved with
.
Note:
When starting the Image Reader, the settings information from the
previous session is displayed.
Set the IP on the IP stage.
For instructions on setting the IP, see the Fluorescent Image Analyzing
System FLA-7000 Operation Manual.
Set the IP stage on the FLA-7000.
For instructions on setting the IP stage on the FLA-7000, see the
Fluorescent Image Analyzing System FLA-7000 Operation Manual.
2. Setting the IP on the IP
Stage
3. Setting the IP Stage on the
FLA-7000