18
2006. Mar
4. Starting Reading
The scanned area is displayed in the real-time window, as shown
below.
The stage is read from the left towards the right.
Reading may be finished at
any time before the whole
scanning area has completed
reading. Click the
button when
you want to finish reading.
Note1:
If you click Stop during reading, the part that has not been read yet
will be saved as an image with a data value of 0 (light intensity of 0).
Note2:
When you click the
button, reading itself is canceled.
You cannot start reading again from the location where reading
stopped.
4-2
When you want to change the display parameters of the real-time
window, refer to the explanations below and make settings.
: Select the type of tone curve from the pull-
down menu.
Exponential: The exponential tone curve is
used to adjust gradations
Linear:
The linear tone curve is used
to adjust gradations.
Sigmoid:
The sigmoid tone curve is
used to adjust gradations.
Содержание FLA-7000
